Bag Breaker Machine Lubrication System Maintenance Cycle And Skills

Blog
Bag Breaker Machine Lubrication System Maintenance Cycle And Skills
Home > News > Blog > Bag Breaker Machine Lubrication System Maintenance Cycle And Skills
Time:2025-03-26
Source:

The maintenance cycle and skills of the lubrication system of bag breaker machine can be summarized and analyzed from the following aspects:

1. Maintenance cycle of lubrication system

Depending on the type of equipment and use environment, the maintenance cycle of the lubrication system is different. Here are some reference periods:

- Daily inspection: Before each use, check whether the lubrication system has leaks and whether the lubricating oil level is normal.

- Weekly check: Check gearbox oil levels and add as needed, clean hydraulic quick fitting ports, check for hydraulic leaks and make necessary repairs.

- Monthly maintenance: lubricate the lubricating parts such as bearings and chains, and check whether the pipes are loose and leaking oil.

- Quarterly or semi-annual replacement: Replace the lubricating oil regularly to ensure that the quality of the lubricating oil meets the requirements.

- Annual maintenance: Complete overhaul and maintenance of the equipment, including replacement of severely worn parts, thorough cleaning and lubrication.

2. Lubrication skills

Select the right lubricating oil: Select the right type of lubricating oil according to the equipment instructions and actual working conditions, such as mineral oil, synthetic oil or special lubricating oil.

- Keep the lubrication system clean: regularly clean the sediment and impurities in the lubrication system, remove the water and air in the system.

- Lubrication method: Before lubrication, the surface and lubrication parts of the equipment should be cleaned to ensure that there are no impurities and dirt. Then evenly apply the right amount of lubricant to avoid too much or too little.

- Use of lubrication tools: Use suitable lubrication tools, such as oil guns, grease pumps, etc., to accurately inject the lubricant into the lubrication point.

3. Maintenance under special circumstances

- Not used for a long time: even if the equipment is not used for a long time, the body should be wiped with oil regularly to prevent rust of carbon steel materials.

- Maintenance under extreme conditions: under high temperature, high humidity or high load conditions, the lubrication cycle should be appropriately shortened.

- Automatic lubrication device: For equipment equipped with automatic lubrication device, the lubrication procedure should be adjusted according to the operation of the equipment, and pay close attention to the actual lubrication situation.

4. Precautions for lubrication system

Avoid mixing different types of lubricants: Different types of lubricants may not be compatible, and mixing may cause equipment damage.

- Check the tightness regularly: ensure that the lubrication system is well sealed to avoid leaks.

- Timely handling of abnormal situations: If the lubricating oil is found to be deteriorated or insufficient, it should be supplemented or replaced in time.

Step 5 Summarize

The maintenance cycle and skills of the lubrication system of the bag breaker machine need to be formulated according to the specific use of the equipment and environmental conditions. Daily inspection, regular replacement of lubricating oil, keeping the system clean and reasonable selection of lubricating oil are the keys to ensure the normal operation of the equipment. Through scientific maintenance methods, equipment life can be effectively extended and work efficiency improved.

No Prev

Return

Bag Breaker Machine Power And Processing Capacity Matching Principle